Olivetti P26W, P20W manual Computer Name Name Assigned to the Printer

NETWORK PRINTER SETTINGS

There are two configurable items under NetBEUI within the printer. These can be configured using the standard set-up utility described in Chapter 1.

COMPUTER NAME	NAME ASSIGNED TO THE PRINTER
Workgroup	PrintServer1
Comment	User definable description

1.Although the workgroup name can be changed, it is recommended that it remains as PrintServer.

Although there are some differences in configuration options between the various Windows platforms, the procedure for printing using NetBEUI is the same.

Please ensure the NetBEUI protocol has been installed in Windows. This can be confirmed by checking the network settings. If NetBEUI has not been installed please refer to the section below.

The relevant Windows installation CD-ROM may be required and you should follow the on-screen dialogue box prompts.

WINDOWS 2000

1.Click the [Start] button, select [Settings] and then click on [Network and Dial-up Connections].

2.Double-click the [Local Area Connection] icon. In the [Local Area Connection Status] dialogue box, click the [Properties] button.

3.In the [Local Area Connection Properties] dialogue box, if the [NetBEUI Protocol] is not listed, click the [Install] button.

4.In the [Select Network Component Type] dialogue box, select [Protocol] and click the [Add...] button.

5.In the [Select Network Protocol] dialogue box, select [NetBEUI Protocol] and click the [OK] button.

6.Click the [Close] button in the [Local Area Connection Properties] dialogue box.

Microsoft Windows> 61