OPTION MENU
In the [Option] menu, the following item can be selected:
ITEM | EXPLANATION |
|
|
Use TCP/IP | If this item is selected, AdminManager uses TCP/IP |
Protocol | protocol to search/configure network interface cards. |
|
|
Use IPX/SPX | If this item is selected, AdminManager uses IPX/SPX |
Protocol | protocol to search/configure network interface cards. |
|
|
Environment | TCP/IP Tab |
Setup | Set broadcast addresses that are |
| |
| used to search printers using the |
| TCP/IP protocol. If [Use TCP/IP |
| protocol] is unchecked, the |
| search will not be carried out |
| using TCP/IP. |
|
|
| NetWare Tab |
| Set network addresses that are |
| used to search printers via |
| NetWare protocol. If there any |
| many NetWare file servers on |
| your network, specify the |
| network address to which the |
| network card belongs. If [Use |
| NetWare protocol] is unchecked, |
| the search will not be carried out |
| using NetWare, but if [Auto |
| Search] is selected, AdminManager will search all |
| networks that AdminManager can detect. |
|
|
| TimeOut Tab |
| [Search Every]: Set response |
| waiting time from a network card |
| in seconds. |
| [Time Out]: Set time out |
| between AdminManager and the |
| network interface card in |
| seconds. |
| [Retry]: Set how many times the retry will be carried |
| out between AdminManager and the network |
| interface card. |
|
|
