Olivetti P20W, P26W manual Ipx

ITEM	EXPLANATION
Printer Trap	Detail…	By selecting the
Setup…		button, the
(continued)		following dialogue
		box is displayed:
		In the dialogue box,
		the following items
		can be configured:
		Trap Enable	Set sending a Trap
			packet, enabled or
			disabled, for each
			destination.
		Printer	Set sending a Trap
		Reboot	packet, enabled or
			disabled, when the
			printer is rebooted.
		Receive	Set sending a Trap
		Illegal	packet, enabled or
			disabled, when the
			printer receives an
			illegal Trap packet.
		On-line	Set sending a Trap,
			enabled or disabled,
			when the printer
			turns to ON-LINE.
		Off-line	Set sending a Trap,
			enabled or disabled,
			when the printer
			turns to OFF-LINE.
		Paper Out	Set sending a Trap,
			enabled or disabled,
		Paper Jam
			when any of these
			conditions occur.
		Cover Open
		Printer
		Error (any
		error)
	IPX	Set node address and network
		address to which a Trap packet will
		be sent.

Network Configuration> 21