PRINTING UTILITY — MANUFACTURERS’ LPR

The LPR Utility is a utility that allows printing data to printers connected to the network via TCP/IP. This utility is for use with Windows XP, Windows 2000, NT4.0.

The utility is for those printers which support TCP/IP and redirects printing data to the lpr port of the specified IP address.

SYSTEM REQUIREMENT

Windows XP/2000/NT4.0/Windows Server 2003 with TCP/IP support and printers that support TCP/IP.

TO INSTALL THE LPR UTILITY

The LPR utility requires that the TCP/IP protocol should be installed into your Windows system. To install the TCP/IP protocol into your Windows system consult your Windows manual.

NOTE:

Windows XP/2000 requires administrator privileges.

1.Set up the printer driver by designating the output destination to [Local Printer (LPT1:)]. For information on setting up your printer driver, see the printer user manual.

2.Insert the Network Software CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double-click setup.exe on the CD-ROM.

3.Select [Software Utilities].

4.Select [Install LPR].

5.Follow the on-screen instructions.

6.Click [Next] when the [Welcome] screen is displayed.

7.Verify [Destination Folder] and [Spool Folder] and click [Next].

8.Check [Register in Startup] if you want automatic startup as Windows boots up. Check [Launch as minimized] if you want to startup in the Icon state and click [Next].

9.Verify the program folder name and click [Next]. The installation starts.

Network Configuration> 50

Page 50
Image 50
Olivetti P20W, P26W manual Printing Utility MANUFACTURERS’ LPR