Network Configuration> 14
The following section explains each tab’s functionality.
Depending on your printer, some items in the following
explanation may not be displayed.
General Tab
This allows you to set or change the
root password used for Admin
Manager, TELNET and FTP.
TCP/IP Tab
This allows you to configure TCP/IP related items.
ITEM EXPLANATION
Change root
password
You can set/change the
root password for
AdminManager, TELNET
and FTP.
ITEM EXPLANATION
Use TCP/IP
Protocol
Set TCP/IP protocol as enabled/disabled.
Use DHCP/
BOOTP
Check this item if IP address, subnet mask, default
gateway and IP addresses for DNS primary server
and secondary servers are retrieved from the DHCP
or BOOTP server. Otherwise, uncheck.
Use RARP Check this item if IP address is retrieved from the
RARP server. Otherwise, uncheck.
IP Address Set the IP address of the selected network interface
card.
Subnet Mask Set the subnet mask of the selected network
interface card.