Notes:
•To temporarily stop playback, press PAUSE. Press PAUSE again to continue playback.
(illus)
•To
REWIND. Press STOP/EJECT when the tape reaches the desired location.
(illus)
Caution: To avoid damaging the tape, do not go directly from rewind to
7.Adjust VOLUME CONTROL 
UP or DOWN 
on the system or VOL-
UME 
UP or DOWN 
on the remote control to a comfortable listening level, and select the desired GRAPHIC EQUALIZER set- ting (CLASSIC, JAZZ, POPS, or
FLAT) on the system.
8.To stop the tape at any time dur- ing playback, press STOP/EJECT. Press STOP/EJECT again to open the cassette compartment and remove the tape.
32
USING CONSECUTIVE PLAY
You can set the tape player to play one side of a tape in TAPE 1, then au- tomatically play one side of a tape in TAPE 2.
1.If necessary, press POWER to turn on the system.
2.Press TAPE to select the tape function. TAPE appears on the display.
3.Press STOP/EJECT on both TAPE 1 and TAPE 2. The cassette com- partment doors open.
4.Load the tape you want to hear first into TAPE 1, then load the other tape into TAPE 2 with their open edges facing down, the sides you want to hear facing you, and their full reels to the left.
5.Gently close the cassette com- partment doors.
6.Press PLAY on TAPE 1. The tape in TAPE 1 plays.
7.While the tape in TAPE 1 is play- ing, press PAUSE and then PLAY on TAPE 2.
(illus - show buttons)
