Relayed Transmission 
6a ADF scanning
When documents are placed on the ADF, the LCD is as shown to the right.
The document(s) is stored into memory with a file number.
The machine starts to dial the telephone number of the Relay Station and sends the document(s).
After the Relay Station completes its transmission to the End Receiving Stations, your machine prints out a RELAY XMT RESULT REPORT sent back by the Relay Station.
6b Flatbed scanning
When a book or a document is placed on the Platen Glass, the LCD is as shown to the right.
(1) Press 1 to select ºYESº. (Pressing 2 returns you to the previous screen.)
The document is stored into memory with a file number.
* STORE * | NO.002 |
PAGES=01 05%
*STORE * COMPLETED TOTAL PAGES=05 25%
6
SCAN FROM FLATBED? 1:YES 2:NO
* STORE * | NO.002 |
PAGES=01 05%
Then the machine prompts whether you wish to store another page.
(2) To store another document into memory, press 1 to select ºYESº. If you do not wish to store an additional document, press 2 to select ºNOº. (See Note 2)
If ºYESº is selected, the LCD is as shown to the right.
Press START to store the document. Repeat this step until you have stored all the desired documents.
If ºNOº is selected, the LCD is as shown to the right and the machine starts to dial the telephone number.
After the Relay Station completes its transmission to the End Receiving Stations, your machine prints out a RELAY XMT RESULT REPORT sent back by the Relay Station.
SCAN ANOTHER PAGE? 1:YES 2:NO
SET ANOTHER PAGE AND THEN PRESS START
*DIALING * NO.002 5551234
Note: 1. You cannot use manual number dialing in step 4.
2.If no action is taken within 60 seconds, the machine will delete the stored pages and return to the standby mode.
161