Sub-addressing

5a ADF scanning

When documents are placed on the ADF, the LCD is as shown to the right.

The document(s) is stored into memory with a file number.

The machine starts to dial the telephone number of the station and sends the document(s) with Sub-addressing information.

5b Flatbed scanning

When a book or a document is placed on the Platen Glass, the LCD is as shown to the right.

(1) Press 1 to select ºYESº. (Pressing 2 returns you to the previous screen.)

The document is stored into memory with a file number.

Then the machine prompts whether you wish to store another page.

(2) To store another document into memory, press 1 to select ºYESº. If you do not wish to store an additional document, press 2 to select ºNOº. (See Note 4)

If ºYESº is selected, the LCD is as shown to the right.

Press START to store the document. Repeat this step until you have stored all the desired documents.

If ºNOº is selected, the LCD is as shown to the right and the machine starts to dial the telephone number of the station and sends the document(s) with Sub-addressing information.

* STORE *

NO.001

PAGES=01 01%

*STORE * COMPLETED TOTAL PAGES=05 25%

6

SCAN FROM FLATBED? 1:YES 2:NO

* STORE *

NO.001

PAGES=01 01%

SCAN ANOTHER PAGE? 1:YES 2:NO

SET ANOTHER PAGE AND

THEN PRESS START

*DIALING * NO.001 5551234

Note: 1. FLASH separates the Sub-address from the Telephone number and is indicated by an ºsº in the

display.

2.Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.

3.The Sub-address is not transmitted during Manual Redial Mode.

4.If no action is taken within 60 seconds, the machine will delete the stored pages and return to the standby mode.

169