Panasonic DMC FZ 28 Setting the Menu, Mode playback mode menu P40, 94 to96, Setup menu P24 to

Preparation

Note

•The clock is displayed when [DISPLAY] is pressed several times during recording.

•You can set the year from 2000 to 2099.

•If the clock is not set, the correct date cannot be printed when you stamp the date on the pictures with [TEXT STAMP] (P101) or order a photo studio to print the pictures.

•If the clock is set, the correct date can be printed even if the date is not displayed on the screen of the camera.

Setting the Menu

The camera comes with menus that allow you to set the settings for taking pictures and playing them back just as you like and menus that enable you to have more fun with the camera and use it more easily.

In particular, the [SETUP] menu contains some important settings relating to the camera’s clock and power. Check the settings of this menu before proceeding to use the camera.

[MODE] playback mode menu (P40, 94 to96)

•This menu lets you select the setting of

the playback methods
such as playback or	
slide show of only the
pictures set as
[FAVORITE].
	A [REC]/[PLAYBACK] selector switch
( [PLAYBACK] mode menu (P99 to 111)	! [REC] mode menu (P79 to 93)
• This menu lets you	• This menu lets you
make the rotation,	set the coloring,
protection, trimming	sensitivity, aspect
or DPOF settings, etc.	ratio, number of pixels
of recorded pictures.	and other aspects of
	the pictures you are
	recording.

[SETUP] menu (P24 to 29)

•This menu lets you perform the clock settings, select the operating beep tone settings and set other settings which make it easier for you to operate the camera.

•The [SETUP] menu can be set from either the [REC MODE] or [PLAYBACK MODE].

∫Functions that cannot be set or will not work under some conditions

Due to the camera’s specifications, it may not be possible to set some of the functions or some functions may not work in some of the conditions under which the camera is used. For details, refer to P130.

VQT1S36 21