Connecting to other equipment

[PLAYBACK] mode: ¸

Playing Back Pictures on a TV Screen

Playing back pictures using the AV cable (supplied)

Preparations:

Set the [TV ASPECT]. (P28)

Turn this unit and the TV off.

1Yellow: to the video input socket

2 White: to the audio input socket

AAlign the marks, and insert. B AV cable (supplied)

Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause trouble.)

Connect the AV cable B (supplied) to the video input and the audio input sockets on the TV.

Connect the AV cable to the [AV OUT] socket on the camera.

Turn the TV on and select external input.

Turn the camera on.

Note

Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or the left and right of the pictures.

Do not use any other AV cables except the supplied one.

Read the operating instructions for the TV.

When you play back a picture vertically, it may be blurry.

You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set [VIDEO OUT] in the [SETUP] menu. (PAL video out is not available on the version DMC-FZ28P sold in the U.S.)

Even if you set [VIDEO OUT] to [PAL], the output signal will still be NTSC in the recording mode. (PAL video out is not available on the version DMC-FZ28P sold in the U.S.)

118 VQT1S36

Page 118
Image 118
Panasonic DMCFZ28K, DMC FZ 28 Playing Back Pictures on a TV Screen, Playing back pictures using the AV cable supplied