Panasonic DMCFZ28K, DMC FZ 28 operating instructions ISO Limit SET, = White Balance

Advanced (Recording pictures)

•If picture noise becomes a problem, we recommend that you take pictures after lowering the maximum ISO sensitivity level, increasing the setting for [NOISE REDUCTION] under [PICT.ADJ.], or lowering the setting for each of the items other than [NOISE REDUCTION]. (P90)

[ISO LIMIT SET]

For details on [REC] mode menu settings, refer to P22.

It will select optimal ISO sensitivity with set value as limit depending on the brightness of the subject.

Applicable modes: ³±´² [AUTO]/[200]/[400]/[800]/[1600]

Note

•The upper limit of the ISO sensitivity can be set.

•The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise.

•It will work when the [SENSITIVITY] is set to [AUTO] or [INTELLIGENT ISO] is set to [ON].

=[WHITE BALANCE]

For details on [REC] mode menu settings, refer to P22.

In sunlight, under incandescent lights or in other such conditions where the color of white takes on a reddish or bluish tinge, this item adjusts to the color of white which is closest to what is seen by the eye in accordance with the light source.

Applicable modes:

[AWB]:			Automatic adjustment
[V]:			When taking pictures outdoors under a clear sky
[Ð]:			When taking pictures outdoors under a cloudy sky
[î]:			When taking pictures outdoors in the shade
[		]¢:	When taking pictures with the flash only
[Ñ]:			When taking pictures under incandescent lights
[		]:
	1
			When using the preset white balance
[		]:
	2
[		]:	When using the preset color temperature setting

¢It cannot be selected in the motion picture mode.

Note

•The optimal white balance will differ depending on the type of halogen lighting being recorded

under so use [AWB], [ 1 ] or [ 2 ].

•The white balance might not be adjusted for the subject where the flash does not reach when the flash is used.

•The white balance is memorized even if the camera is turned off, but [WHITE BALANCE] for the advanced scene mode or the scene mode is set to [AWB] when the advanced scene mode or the scene mode is changed.

82 VQT1S36