Panasonic DMCFZ28K, DMC FZ 28 Connecting to a PC, Press 3/4 to select PC, and then press Menu

Connecting to other equipment

Connecting to a PC

You can acquire recorded pictures to a PC by connecting the camera and the PC.

•You can easily print out or mail the pictures you have imported. Use of the

“PHOTOfunSTUDIO-viewer-”bundled software on the CD-ROM (supplied) is a convenient way of doing this.

•Read the separate operating instructions for the supplied software for more information about the software in the CD-ROM (supplied) and how to install it.

Preparations:

Turn on the camera and the PC.

Remove the card before using the pictures in the built-in memory.

Connect the camera to a PC via the USB connection cable A (supplied).

•Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction.







AUSB connection cable (supplied)

•Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause trouble.)

BAlign the marks, and insert.

CAC adaptor (DMW-AC7PP; optional)

•Use a battery with sufficient battery power or the AC adaptor (DMW-AC7PP; optional). If the remaining battery power becomes low during USB connection, the alarm beeps. Refer to “Disconnecting the USB connection cable safely” (P113) before disconnecting the USB connection cable. Otherwise, data may be destroyed.

Press 3/4 to select [PC], and then press [MENU/

SET].

•If [USB MODE] (P28) is set to [PC] in the [SETUP] menu in advance, the camera will be automatically connected to the PC without displaying the [USB MODE] selection screen. Since there is no need to set this each time you connect to the PC, it is convenient.

USB MODE

PLEASE SELECT

THE USB MODE

PictBridge(PTP)

PC

SELECT SET MENU

112 VQT1S36