VQT1S36
14
Before Use
Place the camera upside down, align the mark on the lens hood with the mark A on the camera and then insert the lens hood.
Check if the screw is loose and then attach the
lens hood.
Tighten the screw.
Do not tighten the screw too much.
Removing the hood adaptor
Grasp the base of the hood adaptor to remove it.
Note
You cannot attach the lens hood the opposite way.
When taking pictures with flash with the lens hood attached, the lower port ion of the photo ma y
turn dark (vignetting effect) and the control of the flash may be disabled because the photo
flash may be obscured by the lens hood. We recommend detaching the lens hood.
When using the AF assist lamp in the dark, detach the lens hood.
For details on how to attach the MC protector, ND filter and PL filter, refer to P122.
You cannot attach the conversion lens when the hood adaptor is attached. (P120)
If any accessories are lost, customers in the US A sh ould con tac t P anaso nic ’ s p a rts depa rt ment
at 1 800 833-9626 and customers in Canada should contact 1800 99-LUMIX
(1-800-995-8649) for further information about obtaining replacement parts.
DMC-FZ28P_PC.book 14 ページ 2008年7月2日 水曜日 午後11時14分