Panasonic DMC FZ 28 OFF „ Auto Power LCD, … Power LCD, High Angle, REC. Info Pattern, Off/On

Preparation

\

[Fn BUTTON SET]

Assign [REC] Mode Menu to 4 button. It is convenient to register [REC] Mode Menu that is used often.

[REVIEW]/[SENSITIVITY]/[WHITE BALANCE]/ [METERING MODE]/[AF MODE]/[I.EXPOSURE]

•Refer to P41 for details about the review.

•Refer to P79 for details about the [REC] Mode Menu.

[MONITOR/

VIEWFINDER]

You can adjust the brightness of the monitor or the Viewfinder in 7 steps.

LCD

[LCD MODE]

These menu settings make it easier to see the LCD monitor when you are in bright places or when you are holding the camera high above your head.

[OFF]

„[AUTO POWER LCD]:

The brightness is adjusted automatically depending on how bright it is around the camera.

…[POWER LCD]:

The LCD monitor becomes brighter and easier to see even when taking pictures outdoors.

Å[HIGH ANGLE]

The LCD monitor is easier to see when taking pictures with the camera held high above your head.

•High angle mode is also canceled if you turn the camera off or power save mode is activated.

•The brightness of the pictures displayed on the LCD monitor is increased so some subjects may appear differently from actuality on the LCD monitor. However, this does not affect the recorded pictures.

•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD mode. Press any button to make the LCD monitor bright again.

•If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or another object to block the light.

•The number of recordable pictures decreases in Auto power LCD, Power LCD and High angle modes.

[GUIDE LINE]

Set the pattern of the guide lines displayed when taking pictures. You can also set whether or not to have the recording information displayed when the guide lines are displayed. (P44)

[REC. INFO.]:	[PATTERN]:
[OFF]/[ON]	[ ]/[ ]

• The [PATTERN] setting is fixed to [ ] in the Intelligent auto mode.

[HISTOGRAM]

This allows you to set either to display or not display the histogram. (P45)

[OFF]/[ON]

VQT1S36 25