Panasonic DMC FZ 28, DMCFZ28K Select Text Stamp on the Playback mode menu. P22

Advanced (Playback)

Press 3/4/2/1 to select text and then press [MENU/SET] to register.

•Press [DISPLAY] to switch text between [A] (capitals), [a] (small case) and [&/1] (special characters and numbers).

•The cursor at the entry position can be moved to the left with [L], and to the right with [Z].

•To enter a blank, move the cursor to [SPACE] or to delete an entered character, move the cursor to [DELETE], and press [MENU/SET].

•To stop editing at any time during text entry, press [‚].

•A maximum of 30 characters can be entered.

Press 3/4/2/1 to move the cursor to [EXIT] and then press [MENU/

SET] to end text input.

Press [‚] to return to the menu screen.¢

¢The menu screen is automatically restored when [MULTI] is selected.

•Press [MENU/SET] to close the menu.

∫Delete the title

[SINGLE] setting

1In step 4 when [SINGLE] (P101) is selected, delete all the texts, select [EXIT], and press [MENU/SET].

2Press [‚].

3Press [MENU/SET] to close the menu.

[MULTI] setting

1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].

2Press [MENU/SET] to close the menu.

Note

•Text can be scrolled if all of the registered text does not fit on the screen.

•The name setting of [BABY1]/[BABY2] or [PET] in scene mode or [LOCATION] in travel date can also be registered by using the operation in steps 4 and following.

•The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and [TITLE EDIT] cannot be registered at the same time.

•You can print out texts (comments) using the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied).

•You can set up to 50 pictures at one time with [MULTI].

•You cannot use titles edit for pictures taken with other equipment.

[TEXT STAMP]

You can stamp the recording date/time, age, travel date or title onto the recorded pictures. It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be resized when stamping the date etc. on them.)

Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P22)

VQT1S36 101