Panasonic DMCFZ28K Battery indication, Battery life, Recording conditions by Cipa standard

Preparation

About the Battery (charging/number of recordable pictures)

∫Battery indication

The battery indication is displayed on the LCD monitor/Viewfinder.

[It does not appear when you use the camera with the AC adaptor (DMW-AC7PP; optional) connected.]

•The indication turns red and blinks if the remaining battery power is exhausted. (The power lamp also blinks) Recharge the battery or replace it with a fully charged battery.

∫The battery life

Number of	Approx.
recordable
	460 pictures
pictures		(By CIPA standard in program AE mode)
Recording time	Approx.
	230 min

Recording conditions by CIPA standard

•CIPA is an abbreviation of [Camera & Imaging Products Association].

•Temperature: 23 oC (73.4 F)/Humidity: 50% when LCD monitor is on.¢

•Using a Panasonic SD Memory Card (32 MB).

•Using the supplied battery.

•Starting recording 30 seconds after the camera is turned on. (When the optical image stabilizer function is set to [AUTO].)

•Recording once every 30 seconds with full flash every second recording.

•Rotating the zoom lever from Tele to Wide or vice versa in every recording.

•Turning the camera off every 10 recordings and leaving it until the temperature of the battery decreases.

¢The number of recordable pictures decreases in Auto power LCD mode, Power LCD mode and High angle mode (P25).

The number of recordable pictures varies depending on the recording interval time. If the recording interval time becomes longer, the number of recordable pictures decreases.

[e.g. When recording once every 2 minutes, the number of recordable pictures decreases to about 115.]

16 VQT1S36