Panasonic DMCFZ28K, DMC FZ 28 operating instructions Off, Auto LCD OFF

Preparation

[HIGHLIGHT]

When the auto review or the review function is activated, white saturated areas blink in black and white.

[OFF]/[ON]

• If there are any white saturated areas, we recommend	[ON]	[OFF]
compensating the exposure towards negative (P53)
referring to the histogram (P45) and then taking the
picture again. It may result in a better quality picture.

•There may be white saturated areas if the distance between the camera and the subject is too close when taking pictures with the flash.

If [HIGHLIGHT] is set to [ON] in this case, the area

directly illuminated by the photo flash will become white saturated and appear blinking in black and white.

In manual focus, the assistance screen appears on the center of the screen to facilitate focusing on the subject.

	[OFF]:
[MF ASSIST]	[MF1]:
	The center of the screen is enlarged.

[MF2]:

The center of the screen is enlarged over the whole screen.

•Refer to P59 for details.

q[ECONOMY]

You can conserve the battery life by setting these menus.

Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery.

p[POWER SAVE]:

The camera is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[2MIN.]/[5MIN.]/[10MIN.]

[AUTO LCD OFF]:

The LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[15SEC.]/[30SEC.]

•Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].

•[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.

•[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].

•Press any button to turn on the LCD monitor again.

•[AUTO LCD OFF] does not work while operating menu or playback zoom.

•AV and HD output is turned off while LCD monitor is turned off.

26 VQT1S36