Panasonic DMC FZ 28, DMCFZ28K operating instructions Pre Af, About

Advanced (Recording pictures)

When selecting [ ]

1 Press 3/4/2/1 to select AF area as shown in the figure to the right.

2 Press [MENU/SET] to set.

Note

•The spot metering target can also be moved to match the AF area when using [Ù].

•Position of the AF area will return to initial state when the camera is set to Intelligent auto mode, When the power save mode is activated, or When this unit is turned off.

[PRE AF]

For details on [REC] mode menu settings, refer to P22.

The camera will adjust focus automatically depending on the settings.

Applicable modes:

[OFF]:
[	]: Quick AF	[	] is displayed on the screen.
[	]: Continuous AF¢	[	] is displayed on the screen.

¢In motion picture mode, only [] (Continuous AF) can be selected.

About [] and []

[] will adjust the focus automatically when the jitter of the camera gets small. [] will adjust the focus at all times (continuous AF operation).

The camera will adjust the focus automatically, and the focus adjustment when the shutter button is pressed becomes faster. It is effective when you do not want to miss the photo opportunity.

Note

•The battery will be consumed faster than usual.

•Press the shutter button halfway again when it is difficult to focus on the subject.

•When [PRE AF] is set to , it may take time to focus on the subject if you rotate the zoom lever from Wide to Tele or suddenly change the subject from a distant one to a nearby one.

VQT1S36 87