Panasonic DMC FZ 28 Compensating the Exposure, Press MENU/SET to finish, Under exposed Properly

Advanced (Recording pictures)

•Depending on the recording conditions, the recording interval may become more than 2 seconds when [10S/3PICTURES] is selected.

•The flash output may not be constant when [10S/3PICTURES] is selected.

•[10S/3PICTURES] cannot be set when auto bracket or color bracket is set, or when the scene mode [FLASH BURST] is set.

•Self-timer cannot be set to 2 seconds or [10S/3PICTURES] in Intelligent auto mode.

•Self-timer cannot be used while in [HI-SPEED BURST] in scene mode.

•You cannot use the following functions when [10S/3PICTURES] is selected.

–Burst mode

–[AUDIO REC.]

[REC] mode:

Compensating the Exposure

Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples.

Under exposed	Properly	Overexposed
	exposed

Compensate the exposure	Compensate the exposure
towards positive.	towards negative.

Press 3 [È] until [EXPOSURE] appears, compensate the exposure with 2/1.

•Select [0 EV] to return to the original exposure.

Press [MENU/SET] to finish.

•You can also press the shutter button halfway to finish.

∫Operate with the joystick

Tilt the joystick toward 2 to select [È], and then move 3/4 to compensate the exposure.

AExposure compensation value

•Select [È] only to return to the original exposure (0 EV).

• Press the shutter button halfway to finish.

Note

• EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by the aperture value and the shutter speed.

•The exposure compensation value appears on the lower left of the screen.

•The set exposure value is memorized even if the camera is turned off.

•The compensation range of the exposure will be limited depending on the brightness of the subject.

VQT1S36 53