Advanced (Playback)

Press 2/1 to select the picture and then press [MENU/SET].

Press 3 to select [YES], and then press [MENU/

SET].

If you press [MENU/SET] while copying pictures from the built-in memory to the card, the copying will stop halfway.

Do not turn the camera off at any point during the copying process.

Press [] to return to the menu screen.

Press [MENU/SET] to close the menu.

If you copy from the built-in memory to a card, all the pictures are copied and then the screen automatically returns to the playback screen.

Note

If you copy picture data from the built-in memory to a card which does not have sufficient free space, the picture data will only be copied halfway. We recommend using a card which has more free space than the built-in memory (about 50 MB).

If a picture exists with the same name (folder number/file number) as the picture to be copied in

the copy destination when [ ] is selected, a new folder is created and the picture is copied. If a picture exists with the same name (folder number/file number) as the picture to be copied in

the copy destination when [ ] is selected, that picture is not copied. (P129)

It may take time to copy the picture data.

Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.

(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to copy them if they were edited with a PC.)

DPOF settings on the original picture data will not be copied. Set the DPOF settings again after copying is finished.

VQT1S36 111

Page 111
Image 111
Panasonic DMC FZ 28, DMCFZ28K operating instructions Set