Panasonic DMC FZ 28, DMCFZ28K operating instructions Selecting a single picture and printing it

Connecting to other equipment

•Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC7PP; optional).

•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

Selecting a single picture and printing it

Press 2/1 to select the picture and then press [MENU/SET].

• The message disappears in about 2 seconds.

Press 3 to select [PRINT START] and then press [MENU/SET].

• Refer to P116 for the items which can be set before starting to print the pictures.

• Press [MENU/SET] to cancel printing halfway.

•Disconnect the USB connection cable after printing.

Selecting multiple pictures and printing them

Press 3.

Press 3/4 to select an item and then press [MENU/

SET].

• If the print check screen has appeared, select [YES], and print the pictures.

Item Description of settings

Multiple pictures are printed at one time.

•Press 3/4/2/1 to select the pictures, and then When [DISPLAY] is [MULTI SELECT] pressed, [é] appears on the pictures to be printed. (When [DISPLAY] is

pressed again, the setting is canceled.)

•After the pictures have been selected, press [MENU/SET].

[SELECT ALL] Prints all the stored pictures.

[DPOF PICTURE] Prints the pictures set in [DPOF PRINT] only. (P108)

[FAVORITE]¢ Prints the pictures set as favorites only. (P107)

¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P107)

VQT1S36 115