Advanced (Recording pictures)

[AF/AE LOCK]

For details on [REC] mode menu settings, refer to P22. Take a picture with the focus or exposure locked.

This is a technique for setting the focus and the exposure in advance when the subject is outside the focus area or when the contrast is too sharp and the appropriate exposure cannot be achieved.

Applicable modes:

[AF]:

Only the focus is locked.

 

[

 

] is displayed when the focus is adjusted.

 

 

 

 

 

 

[AE]:

Only the exposure is locked.

 

[

 

], aperture value, and shutter speed is displayed when the exposure

 

is adjusted.

 

 

 

[AF/AE]:

Both focus and exposure are locked.

[ ], aperture value, and shutter speed are displayed when the focus and exposure are adjusted.

Setting the AF/AE lock

1Aim the AF area at the subject.

2Press [AF/AE LOCK] to fix the focus and exposure.

3Move the camera to compose the picture and then press the shutter fully.

To cancel the AF/AE lock

The setting is canceled by pressing the [AF/AE LOCK] again.

Note

The exposure is set, even if the brightness of the subject changes.

The subject can be focused again by pressing the shutter button halfway even when AE is locked.

Program shift can be set even when AE is locked.

Lock is canceled when zooming is performed after locking. Perform the locking again.

[I.EXPOSURE] (Intelligent exposure adjustment)

For details on [REC] mode menu settings, refer to P22.

Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to how you see.

Applicable modes: ³±´² [OFF]/[LOW]/[STANDARD]/[HIGH]

Note

[ ] is displayed when it is set to either [LOW], [STANDARD], or [HIGH].

Even if the ISO sensitivity is set to [ISO100], ISO sensitivity may become higher than [ISO 100] when a picture is taken with [I.EXPOSURE] enabled.

Compensation effect may not be achieved depending on the conditions.

[ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.

[LOW], [STANDARD], or [HIGH] represents the maximum range of effect.

88 VQT1S36

Page 88
Image 88
Panasonic DMCFZ28K, DMC FZ 28 operating instructions AF/AE Lock, Exposure Intelligent exposure adjustment, Af/Ae