Panasonic DMC FZ 28, DMCFZ28K Press 1 ‰ Press 3/4 to select a mode, Press MENU/SET

Advanced (Recording pictures)

Press 1 [‰].

Press 3/4 to select a mode.

•You can also press 1 [‰] to select.

•For information about flash settings that can be selected, refer to “Available flash settings by recording mode”. (P48)

Press [MENU/SET].

•You can also press the shutter button halfway to finish.

•The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set.

Item Description of settings

:AUTO The flash is automatically activated when the recording conditions make

‡it necessary.

The flash is automatically activated when the recording conditions make it necessary.

:	It is activated once before the actual recording to reduce the red-eye
AUTO/Red-eye	phenomenon (eyes of the subject appearing red in the picture) and then
reduction¢	activated again for the actual recording.

•Use this when you take pictures of people in low lighting conditions.

‰: Forced flash ON	The flash is activated every time regardless of the recording conditions.
:	• Use this when your subject is back-lit or under fluorescent light.
Forced ON/Red-eye	• The flash setting is set to [	] only when you set [PARTY] or
reduction¢	[CANDLE LIGHT] in scene mode. (P66)
	If you take a picture with a dark background landscape, this feature will
:	slow the shutter speed when the flash is activated so that the dark
	background landscape will become bright. Simultaneously it reduces the
Slow sync./Red-eye
	red-eye phenomenon.
reduction¢
	• Use this when you take pictures of people in front of a dark
	background.
	The flash is not activated in any recording conditions.
Œ: Forced flash OFF • Use this when you take pictures in places where the use of the
	flash is not permitted.

¢The flash is activated twice. The subject should not move until the second flash is activated.

Flash interval depends on the brightness of the subject.

∫About the digital red-eye correction

When the flash is used with the Red-eye reduction ([ ], [ ], [ ]) selected, it will automatically detect and correct the red-eye in the image data.

¢It may not be able to correct the red-eye depending on the recording conditions. It may also correct objects other than red-eye.

VQT1S36 47