Panasonic DMC FZ 28, DMCFZ28K Taking Pictures using Burst Mode, Take a picture, ˜/‚button

Advanced (Recording pictures)

Press [MENU/SET] to close the menu.

•You can also press the shutter button halfway to finish.

Note

•When setting exposure bracket, [ ] appears on the screen.

•When setting color bracket, [ ] appears on the screen.

•When taking pictures using auto bracket after setting the exposure compensation range, the pictures taken are based on the selected exposure compensation range.

When the exposure is compensated, the exposure compensation value appears on the lower left of the screen.

•The exposure may not be compensated with auto bracket depending on the brightness of the subject.

•The auto bracket/color bracket setting is canceled if you turn the camera off or [POWER SAVE] is activated.

•When auto bracket/color bracket is set, the auto review function is activated regardless of the auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP] menu.

•In shutter-priority AE and manual exposure, if the shutter speed is set to more than 1 second, auto bracket is canceled.

•[Œ] is set for the flash when auto bracket/color bracket is set.

•Burst is canceled when auto bracket/color bracket is set.

•The one set last will take precedence. (auto bracket and color bracket cannot be set simultaneously.)

[REC] mode:

Taking Pictures using Burst Mode

Pictures are taken continuously while the shutter button is pressed. Select the ones you really like from among the pictures you have taken.

Press [ ˜/‚ ] to display the burst mode selection menu, and then press 3/4 to select the burst mode.

A[˜/‚]button

Press [MENU/SET].

•You can also press the shutter button halfway to finish.

•The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set.

Take a picture.

•Hold down the shutter button fully to activate the burst mode.

A

VQT1S36 55