Panasonic DMC FZ 28, DMCFZ28K Attaching the Lens Hood, Attach the lens cap, Strap

Before Use

Attach the lens cap.

• Detach the lens cap before turning on the camera in the recording mode.

• Do not hang or swing around this unit with the lens cap string attached.

• Be careful not to lose the lens cap.

∫Strap

•We recommend attaching the strap when using the camera to prevent it from dropping.

Pass the strap through the hole at the strap eyelet.

Pass the strap through the stopper and fasten the strap.

A Pull the strap 2 cm or more.

• Attach the strap to the other side of the camera being careful not to twist it.

• Check that the strap is firmly attached to the camera.

• Attach the strap so that the “LUMIX” LOGO is on the outside.

Attaching the Lens Hood

In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting. The lens hood cuts off excess lighting and improves the picture quality.

•Check that the camera is turned off.

•Close the flash.

Securely attach the hood adaptor so that it is all the way into the lens barrel.

• Do not tighten the hood adaptor too much.

• When attaching the hood adaptor, take extended care not to cross-thread. When removing it, do not squeeze it as it will not unscrew freely.

VQT1S36 13