Panasonic DMC FZ 28, DMCFZ28K Setting Date/Time (Clock Set)

VQT1S36
20
Preparation
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
Turn the camera on.
•The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
[PLAYBACK] mode.)
A[MENU/SET] button
BCursor buttons
Press [MENU/SET].
Press 2/1 to select the items (year , month,
day, hour, minute, displ ay seque nce or tim e
display format), and press 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P78)
‚: Cancel without setting the clock.
•Select either [24HRS] or [AM/PM] f or the time display
format.
•AM/PM is displayed when [AM/PM] is selected.
•When [AM/PM] is selected as the tim e display format, midnight is displa yed as AM
12:00 and noon is displayed as PM 12:00. This display form at is common in the US an d
elsewhere.
Press [MENU/SET] to set.
•After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to recording mode, and check that the display reflects the settings that were
performed.
•When [MENU/SET] has been pressed to complete the settin gs witho ut the cloc k hav ing
been set, set the clock correctly by following the “Changing the clock setting”
procedure below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1. (P22)
•It can be changed in steps 3 and 4 to set the clock.
•The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Changing the clock setting
OFF ON
:
:
DMC-FZ28P_PC.book 20 ページ ２００８年７月２日 水曜日 午後１１時１４分