Connect
Menu > Connect > Bluetooth
Connect
If you are using a circuit switched connection: Select Make New Connection.
Select Modem - (Panasonic X70 or Bluetooth® COM port from the Select a Device window).
Enter the phone number for your Internet Service Provider (ISP). If you are using a GPRS connection:
Select Make New GPRS Connection (GPRS).
Select Modem - (Panasonic X70 or Bluetooth® COM port from the Select a Device window).
Enter the Access Point Name (APN) supplied by your GPRS network operator.
Note: With some Bluetooth® USB adaptors you may need to add a modem on the correct COM port for the Data Connection Assistant. To do this on your computer select Start > Settings > Control Panel > Phone and modem options > Add > COMn, where n is the Bluetooth® COM port number.
Setting your computer’s dial up connection
From your web browser:
Select Start > Program > Panasonic Data Connection Assistant
Select the previously created data connection, then select the Connect option from the File menu.
Enter your user name and password and select Connect. Once connected you can:
zBrowse web sites using your computer’s web browser software, e.g. Internet Explorer.
zSend and receive
zSend and receive files to and from a server connected to the Internet using FTP software.
Note: For further details see the Data Connection Assistant documentation.
Faxing from your computer via Bluetooth®
You can use Bluetooth® to connect your computer (laptop, notepad or PC) to your phone without using any cables. Your phone acts as a fax modem. You can use it for sending and receiving faxes.
Once it is set up, whenever you send a fax from your computer it will use Bluetooth® to connect to the phone, then your phone will dial the fax number.
To send and receive faxes you must subscribe to your network operator’s fax service. This gives you a second number for receiving incoming faxes.
To set up your computer and phone you need to:
