Settings
Once you have seen the total time you can reset the timer:
Press Q.
You are asked ‘Reset Total Time?’. Press Q.
Enter the lock code.
Note: The lock code is preset to 0000. For security you should change this to a four figure number that you can remember, see Changing the phone lock code on page 53.
Checking the status of call waiting, caller’s id and withhold id
Note: This is network dependent R.
Select Calls.
Select Call Waiting, Caller’s ID or Withhold ID. The status is displayed.
For Call Waiting, you can change the status:
If Call Waiting is disabled and you want it enabled, select Menu > Enable. If Call Waiting is enabled and you want it disabled, select Menu > Disable.
Connections
Connections
Last Connection | All Connections | Call Priority |
Viewing details of your last connection
Select Connections > Last Connection.
The time and data transfer details are displayed.
Viewing the combined details of your previous connections
Select Connections > All Connections.
The combined length of all your connections since the connection was last reset, is displayed.
Once you have seen all the details you can reset the total time and data: Press Q.
You are asked ‘Reset Total Time and Data?’. Press Q.Enter the lock code.
Note: The lock code is preset to 0000. For security you should change this to a four figure number that you can remember, see Changing the phone lock code on page 53.
Menu > Settings > Call Service
Settings
49
