Panasonic EB-X70 - page 81

81
Messaging
Messaging
Configuring MMS
You must configure your MMS before you can send or receive MMS messages. You can
create up to three server profiles on the phone.
Select Circuit Switch, select Set, then select Edit to set:
zDigital Dial #
zAnalogue Dial #
zCircuit Type. Select from Digital and Analogue.
zUser ID
zUser Password
Select GPRS, select Set, then select Edit to set:
zAccess Point Name
zUser ID
zUser Password
zAuthentication. Select from Normal, Encrypted and None.
Note: Your MMS settings may have been pre-configured by your service provider.
MMS may not work if you change these settings.
Note: Once you have set up a server you need to select the new server and select Set to
activate the new setting.
Server List
<1> to <3>
Server
Auto
Edit
Profile
Name
Gateway
IP
Bearer
Type
Server
URL
Circuit
Switch
GPRS
Menu > Messaging > Settings > MMS
X70_US_Text.fm Page 81 Tuesday, March 9, 2004 1:21 PM