2. Preparation
16
2PreparationConnections and Setup
2.1 Connections
Important:
LThe unit will not function when there is a power
failure. To make calls in emergency situations,
you should connect a telephone that can
function during a power failure to the telephone
line.

2.1.1 Base unit

Caution:
LWhen you operate this product, the power outlet
should be near the product and easily
accessible.
LBe sure to use the telephone line cord included in
this unit.
LDo not extend the telephone line cord.
LThis unit is not designed to be used with rotary
(pulse dialling) services.
Note:
LIf any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
LIf you use the unit with a computer and your internet
provider instructs you to install a filter, please
connect the telephone line cord as follows (page 65,
66).
1Telephone line cord
LConnect to a single telephone line jack.
2Power cord
LConnect to a power outlet (220 V – 240 V, 50/60
Hz).
2
1

Telephone

line cord Noise filter

(For ADSL users)