2. Preparation
18
Volume
2.4 Adjusting cordless handset volume
Ringer volume
1. {j/OK}
2. Press {^} or {V} to select Handset Setup. i
{>}
3. Press {^} or {V} to select Ringer Setup. i
{>}
4. Press {^} or {V} to select Ringer Volume. i
{>}
5. Press {^} or {V} to select the desired volume. i
{>} i {ih}
Note:
LWhen receiving a call, you can adjust the ringer
volume by pressing {^} or {V}.
LWhen the ringer is turned OFF, the cordless handset
will ring for alarm and intercom calls.
Ringtone
You can select the desired cordless handset ringtone for
outside calls and intercom calls (page 52).
Cordless handset receiver volume
While using the receiver, press {^} or {V}.
Speaker volume
While using the speakerphone, press {^} or {V}.
2.5 Adjusting base unit volume
Ringer volume
While the unit is idle, press {A} or {B}.
LIf there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press {B} repeatedly to display RINGER OFF= OK?.
i {SET}
LThe base unit will not ring for outside calls.
The base unit will ring at the low level for intercom
calls.
LTo turn the ringer back ON, press {A}.
Ringtone
LYou can select the desired base unit ringtone for
outside calls (feature #17 on page 47).
Speaker volume
While using the speakerphone, press {A} or {B}.

{^}{V}{>}

{j/OK}
{ih}

{SET}

{A}{B}