Panasonic KX-FC225AL, KX-FC225NZ manual Letter 92% default, 86% 72%, Darker, Reception

				9. Programmable Features
Feature	Feature code	Selection
Receiving oversized	{#}{3}{6}	If the size of the document sent by the other party is as large as
documents		or larger than the recording paper, the unit can reduce the
		document and print it. Select the desired reduction rate.
		{1} “72%”
		{2} “86%”
		{3} “92%” (default)
		{4} “100%”
			Setting	Recording	Original
				paper size	document size
			“100%”	A4	Letter
			“92%” (default)	A4	A4
			“86%”	A4	A4
			“72%”	A4	Legal
		Note:
		L The information of the sending party is printed on the top of
			each page. Therefore, even if the original document is the
			same size as the recording paper, the document will be
			divided into 2 sheets when printed at “100%”. Select “92%” to
			print on 1 sheet.
Changing the LCD	{#}{3}{9}	{1} “NORMAL” (default)
display contrast*2		{2} “DARKER”
Changing the fax	{#}{4}{1}	If you wish to use an extension telephone (page 35) to receive
activation code		faxes, activate this feature and program the activation code.
		{0} “OFF”
		{1} “ON” (default)
		1. {MENU} i{#}{4}{1}
		2. Press {1} to select “ON”. i{SET}
		3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}.
			L The default code is “;#9”.
		4. {SET} i{MENU}
Setting the memory	{#}{4}{4}	To alert you with a beeping sound when a received fax document
reception alert		is stored into memory due to some existing problem.
		{0} “OFF”: Deactivates this feature.
		{1} “ON” (default): You will hear a beeping sound.
		Note:
		L The slow beeps will continue until you clear the printing
			problem and make sure the unit is supplied with enough paper
			to print the stored document.
Setting friendly	{#}{4}{6}	To receive a fax automatically when you answer a call and hear a
reception		fax calling tone (slow beep).
		{0} “OFF”: You have to press {FAX START} for fax reception.
		{1} “ON” (default): You do not have to press {FAX START} for fax
		reception.

49