Caller ID
Caller ID service from your phone company!
This unit is compatible with the Caller ID service offered by your local telephone company. To use this feature, you must subscribe to the Caller ID service.
Change the following ring settings to 2 or more rings beforehand.
—TAD ring setting and FAX ring setting (feature #06 on page 80)
—TEL/FAX ring setting (feature #78 on page 87)
How Caller ID is displayed
The calling party’s name or telephone number will be displayed after the first ring. You then have the option of whether or not to answer the call depending on the caller.
Base unit display: (Example)
Chris1Horner
Handset display: (Example)
Chris1Horner
The unit will automatically store the caller information (name, telephone number and the time of the call). You can view the caller information (p. 36, 37) and print the caller ID list (p. 104).
Note:
●If the unit is connected to a PBX (Private Branch Exchange) system, you may not receive the caller information. Consult your PBX supplier.
●If the unit cannot receive caller information, the following will be displayed.
Base unit display
OUT1OF1AREA
PRIVATE1CALLER
LONG1DISTANCE
Handset display
Out of area
Private caller
Long distance
The caller dialed from an area which does not provide Caller ID service.
The caller requested not to send caller information.
The caller made a long distance call.
To confirm caller information using the Caller ID list!
The unit will store the 30 most recent caller information.
—To print manually, see page 104.
—To print automatically after every 30 new calls, activate feature #26 (p. 82).
35