Conferencing Phone Manager

Using Conferencing Phone Manager

The unit can be used in conjunction with Conferencing Phone Manager. This software can be found on the included CD-ROM, and allows you to operate and program the unit using a computer.

For software installation instructions, see page 29.

Connecting a Computer

Connect the included USB cable to the USB port of the unit (A) and of the computer.

A USB

Note

We recommend using only the included USB cable when connecting the unit to a computer via USB.

Starting Conferencing Phone Manager

You can start Conferencing Phone Manager using any of the following methods.

Using the shortcut icon

Double-click the Conferencing Phone Manager shortcut icon on the desktop (created during software installation).

From the [Start] menu Click [Start][All

Programs][Panasonic][Conferencing Phone Manager][Conferencing Phone Manager].

After Conferencing Phone Manager starts, the front panel screen is displayed.

Exiting Conferencing Phone Manager

To exit, click the icon () in the upper-right corner of the front panel screen.

Operating the Unit Using

Conferencing Phone

Manager

From the front panel screen, you can operate the unit just as if you were using the front panel of the unit itself. For information about using the following commonly used features, refer to pages listed below.

Making calls (page 31)

Answering calls (page 34)

Adding entries to the phonebook (page 36) For information about other features, refer to the relevant sections in this document.

Document Version 2008/10

Operating Instructions

57

Page 57
Image 57
Panasonic KX-NT700 Operating the Unit Using Conferencing Phone Manager, Starting Conferencing Phone Manager