Making and Answering Calls
Line Selection
The unit can make calls using the following lines.
–IP line (see page 31)
–TEL line (see page 31)
–PS line (see page 41)
–PC line (see page 42)
When you make a call, the line icon in the
You can change the selected line by pressing the center function button ([F2]). The line that will be selected is indicated by the function button icon.
Example:
1.The IP line is selected.
2.TEL is pressed. The TEL line is now selected.
Note
•If the unit is not connected to an IP network,
IP is not displayed and the IP line cannot be selected.
Selecting the Available Lines
The IP line is always available when the unit is connected to an IP network; if it is not selected (i.e., if it is not shown in the
you can select it by pressing IP .
Whether the TEL line, PS line, or PC line is available is determined by the "Line Selection" setting. For example, when it is set to "IP + PS", the IP and PS lines are available.
You can change the "Line Selection" setting using the following procedure.
1.Press [MENU].
2.Press LINE .
3.Select the desired setting.
•"IP + TEL": The IP and TEL lines are available.
•"IP + PS": The IP and PS lines are available.
•"IP + PC": The IP and PC lines are available.
4.Press SAVE .
5.Press [MENU].
30
Operating Instructions | Document Version 2008/10 |
