Conferencing Phone Manager
Programming the Unit
Using Conferencing
Phone Manager
1.Start Conferencing Phone Manager (see page 57).
2.Click the icon (
) in the
•The programming screen is displayed.
3.Click the desired programming category name on the left side of the screen.
•The corresponding parameters are displayed on the right side of the screen.
4.Change the parameters as desired.
5.Click [OK].
•The front panel screen is displayed again.
•To cancel without changing any settings, click [Cancel].
Note
•If the unit must be restarted before the new settings become effective, a dialog will prompt you to restart the unit. Click [Yes] to restart the unit.
Restarting the Unit Using
Conferencing Phone
Manager
1.Click the icon (
) in the
•The programming screen is displayed.
2.Click [Restart].
3.Click [Restart], then click [Yes].
•The front panel screen is displayed again.
58
Operating Instructions | Document Version 2008/10 |
