Using the Phonebook
Storing Caller Information in the Base Unit Phonebook 
This feature can be operated with the cordless handset only.
To use an Audible Caller ID feature (p. 38), you must store caller information into the base unit phonebook.
To exit the operation, press 
at any time.
1 | Press LEFT SOFT | 2 Press JOYSTICK. | 3 | Select “Base Phonebook”, |
| KEY. |
|
| then the display shows the |
number of empty phonebook entries.
4 Enter Name (p. 41). | 5 | Press JOYSTICK. | 6 | Enter Phone Number. | ||||||
(max. 16 characters) |
|
|
|
|
|
|
| (max. 24 digits) | ||
7 Press JOYSTICK. | 8 | Select “Start | 9 | Record the name within | ||||||
|
|
|
| Recording”. |
| 1 minute. | ||||
|
|
|
|
|
|
|
|
|
|
|
10 Press JOYSTICK. 11 Select “Save”, then “Saved” is displayed.
•If “Memory Full” is displayed in step 3, the base unit phonebook is full. To store, delete other stored items in the base unit phonebook.
•If “Memory Full” is displayed in step 8, the remaining recording time is 0. To store, delete unnecessary incoming/memo messages (p. 95, 97).
•To continue storing other caller information, repeat from step 4.
•If you do not use Audible Caller ID feature, select “Skip Recording” at step 8 and go to step 11.
•If you need to go back to entering name during entering phone number, move the JOYSTICK up.
40
