Panasonic KX-TCD540AL Remote Operation from a Touch Tone Phone, Setting the Remote Code OFF

Answering System

Remote Operation from a Touch Tone Phone

You can operate the answering system from any touch tone phone.

Firstly you must store your remote code using the handset near the base unit. The 3-digit remote code prevents unauthorised use of your answering system for listening to recorded messages.

Setting the Remote Code ON

1 Press JOYSTICK

(or move).

2 Select “	TAM
Operation”.

3 Select “Setting

TAM”.

4 Select “Remote	5	Enter 3-digit Remote	6 Press JOYSTICK.
Code”.		Code.

Setting the Remote Code OFF

Follow steps 1 to 4 shown above, then:

5 Press £. 6 Press JOYSTICK.

•The factory preset is Remote Code OFF.

Turning ON the Answering System Remotely

You can turn on the answering system from any touch tone phone.

1 Call from a touch tone phone then wait for 15 rings.

3 Enter remote code after greeting message playback.

2 Enterbeep. remote code within 10 seconds after a long

4 Voice menu starts after 3 seconds. Follow the guidance (p. 102).

OR

Enter your desired direct remote command (See next page).

•If your remote code is not stored, you cannot turn on the answering system remotely.

100