Multi-Unit User Operations

Cordless Handset Registration to a Base Unit &

The cordless handset supplied with the base unit is already registered. If an optional cordless handset is purchased, it must be registered as follows.

Charge the optional cordless handset batteries for 7 hours before initial use. Cordless handset registration must be completed within 1 minute after pressing . If over 1 minute, press then start over again.

To exit the operation, press at any time.

1

Press JOYSTICK

2

Select “

Setting

3 Select

 

(or move).

 

Handset”.

 

 

Registration”.

4

Select “Register

5

Press and hold

button on the Base Unit (for

 

H/set”.

 

about 3 seconds) until the tone sounds.

6

Select the desired

7 Enter 4-digit Base Unit

8 Press JOYSTICK.

 

base unit.

 

PIN.

 

 

 

(Factory Preset 0000)

When a cordless handset is registered successfully, a confirmation tone sounds and the “ ” icon is displayed.

If you enter the incorrect Base Unit PIN, an error tone sounds. Repeat from step 1.

To register a cordless handset to more than one base unit, repeat from step 1 with the other base unit(s).

The cordless handset main menu may change depending on the base unit that the cordless handset is registered to.

Telephone System

79

Page 79
Image 79
Panasonic KX-TCD540AL operating instructions Handset Registration, Press and hold, About 3 seconds until the tone sounds