2, 3, 4, 5 | 1 |
| ||
|
| CAMERA | ||
W.B./SHUTTER/IRIS/ | 2 | |||
VCR | ||||
MF/VOL/JOG |
| |||
2 | 1 | 3 | CARD P. B | |
|
| |||
PUSH |
|
| ||
1
1
CAMERA FUNCTIONS
1.CAMERA SETUP 2.DIGITAL EFFECT 3.CARD SETUP
PRESS MENU TO EXIT
2
VCR FUNCTIONS
1.PLAYBACK FUNCTIONS 2.DIGITAL EFFECT 3.CARD SETUP
PRESS MENU TO EXIT
3
CARD FUNCTIONS
1.ERASE CARD FILE 2.CARD EDITING 3.DISPLAY SETUP 4.OTHER FUNCTIONS
PRESS MENU TO EXIT
W.B./SHUTTER/IRIS/
MF/VOL/JOG
21,
21
PUSH
PICTURE
|
|
|
|
|
|
|
| 4 |
640 | 1200 |
|
|
| 640 |
|
| |
640 | 640 |
|
|
|
|
|
| |
| 1200 |
|
| |||||
| No.25 | IMGA0012.JPG |
| |||||
Using the Menu Screen
To facilitate the selection of a desired function or setup, this Movie Camera displays various function setups on Menus.
1Press the [MENU] Button.
≥When the [CAMERA] Lamp is on, the Camera Function Menu is displayed. 1
≥When the [VCR] Lamp is on, the VCR Function Menu is displayed. 2 ≥When the [CARD P.B] Lamp is on, the Card Function Menu is
displayed. 3
2Turn the [PUSH] Dial to select a desired
≥Turn the [PUSH] Dial to display the highlightened item.
3Press the [PUSH] Dial to display the selected
4Turn the [PUSH] Dial to select the item to be set.
5Press the [PUSH] Dial to set the selected item to a desired mode.
≥With each press of the [PUSH] Dial, the cursor [1] moves to the next mode. Menu items that cannot be used in combination with the selected
item are displayed in dark blue.
≥While a Menu is displayed, you cannot record or play back. Menus can be displayed during playback but not during recording. The above operations can be done using the [MENU] Button, [SET] Button and [ITEM] Button on the Remote Controller. (l8)
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when the Movie Camera is turned off. However, if the Battery or AC Adaptor is disconnected before turning off the Movie Camera, the selected setup may not be retained. (But, the setups of [EFFECT2] (l24) are not retained.)
≥Menu operation flow is shown in this text by >>.
ªFile Selection in the Card Playback Mode
A File Selection Operation may be necessary during Menu Operations. In this case, carry out the following procedure.
1Turn the [PUSH] Dial and select a File.
≥The selected File is marked by a frame 4.
2Press the [PUSH] Dial to confirm the selection of the File.
≥After the above File Selectioin Procedure, carry out the various Menu Operations. (The above procedure will not be repeated in the following instructions.)
13
