1
RESET | PICTURE MPEG4 VOICE | AUTO MNL FOCUS |
CARD |
| |
| MODE |
|
CAMERA Mode
Recording
When recording with the Mode Selector Switch 1 set to [AUTO], the Movie Camera automatically adjust the focus and white balance. In some cases, they cannot be adjusted automatically and need to be adjusted manually.
(l22, 23)
1 Set the [OFF/ON/MODE] Switch to [ON]. |
CAMERA
OFF ON MODE
2
VCR 
1 CARD P. B
≥The [CAMERA] Lamp lights up. 2 |
ACCESS
| 3 |
| TAPE |
| CARD |
4 | 2 |
35
RECPAUSE
RECORD PAUSE
7 
6
8
x
°
2 | Slide the [TAPE/CARD] Selector towards [TAPE]. |
3 | Press the Recording Start/Stop Button. |
| ≥Recording starts. |
| ≥After the [RECORD] is displayed, it changes to [REC]. 3 |
ªRecording Lamp (Tally Lamp) 4
The Recording Lamp lights up during recording and alerts those being recorded that recording is in progress.
≥The Recording Lamp does not light up if the [REC LAMP] on the [OTHER FUNCTIONS]
ªTo Pause the Recording
Press the Recording Start/Stop Button again.
The [PAUSE] Indication is displayed. 5
≥If the Recording Pause Mode continues for more than 6 minutes, the power is turned off automatically for tape protection and power conservation. To resume recording from this condition, turn on the power again.
ªTo Check the Recording
By pressing the [S] Button 6 briefly in the Recording Pause Mode, you can play back the last few seconds of the recorded scene.
≥The [CHK] Indication is displayed. After checking, the Movie Camera resumes the Recording Pause Mode.
ªTo View the Recorded Scene while the Recording Is
Paused (Camera Search)
The recorded scene can be viewed by keep pressing the [jSEARCH] Button
6or [SEARCHi] Button 7 in the Recording Pause Mode.
≥When the [jSEARCH] Button is pressed, images are played back in the reverse direction.
≥When the [SEARCHi] Button is pressed, images are played back in the forward direction.
ªRecording Yourself
By opening the LCD Monitor and rotating it frontward (to the lens side), you can let the subject in front of the Movie Camera monitor the shot while recording is in progress.
≥Opening the LCD Monitor automatically turns off the Viewfinder. However, when you turn the LCD Monitor forward, the picture also appears in the Viewfinder.
≥If you prefer to have the image on the LCD Monitor to look like an image in a mirror, set [SELFSHOOT] on the [OTHER FUNCTIONS]
Images are recorded normally and no left and right reversal occurs.
≥If [MIRROR] is used during
as the Recording Indication [ 
] (Red), Recording Pause Indication [ 
] (Cyan) and Remaining Battery Power Indication [x], are displayed. 8
≥If a general Warning/Alarm Indication [°] appears, return the LCD Monitor to the original position in order to check the specific content of the Warning/ Alarm Indication.
ªTo Finish the Recording
Set the [OFF/ON/MODE] Switch to [OFF].
≥For other notes concerning this item, see page 46.
18
