W.B./SHUTTER/IRIS/ 1 MF/VOL/JOG

2 1

PUSH

1

Formatting a Card

If a Card becomes unreadable by the Movie Camera, formatting it may make it reusable. Formatting erases all the data recorded on a Card.

1Set [CARD FUNCTIONS] >> [CARD EDITING] >> [CARD

FORMAT] >> [YES].

Since a confirmation message appears, select [YES] and formatting will be carried out.

When the formatting is completed, the screen becomes white.

It may not be possible to use the Card which was formatted using this Movie Camera on another unit. In this case, format the Card on the unit which will be using the Card. Take steps to ensure that valuable files are stored on the personal computer, etc. as well before proceeding.

~~~~~~~~~~~~~~~~~~~~~~~~

Writing Printing Data on a Card

W.B./SHUTTER/IRIS

2, 3, 4

MF/VOL/JOG

2

1

PUSH

1

PICTURE MPEG4 VOICE

CARD

MODE

2, 5

(DPOF Setting)

DPOF Setting Printing data (DPOF Settings), such as the number of images to be printed, can be written to the Card. “DPOF” means Digital Print Order Format.

1Slide the [PICTURE/MPEG4/VOICE] Switch to [PICTURE].

2Set [CARD FUNCTIONS] >> [CARD EDITING] >> [DPOF SETTING] >> [YES] >> [VARIABLE].

To print all pictures one at a time, select [ALL 1]. When all images are not printed, select [ALL 0].

3

 

4

 

DPOF SETTING

 

(PRINT QUANTITY)

2

1

5

 

PRESS MENU TO EXIT

Select a desired picture and press the [PUSH] Dial.

The number of prints set by DPOF is displayed. 1 The selected image is marked with a frame.

Turn the [PUSH] Dial and select the number of pictures to be printed, and press the [PUSH] Dial.

When DPOF setting is set to 1 or more files, the [µ] Indication 2 appears in white. When both DPOF setting (is set to 1or more files) and Slide Show setting are completed, the [µ] Indication 2 appears in blue.

Repeat Step 3 and 4 and press the [MENU] Button when the setup is completed.

To Verify DPOF Setting

Select [VERIFY] in Step 2 above. The pictures for which 1 or more print is set in DPOF are played back continuously.

The number of prints can be set from 0 to 99.

Perform the DPOF Settings with your own Movie Camera in use.

Verifying the DPOF Settings may take a little time. Wait until the [ACCESS] Lamp goes out.

42

Page 42
Image 42
Panasonic NV-EX21EG Formatting a Card, Writing Printing Data on a Card, Set Card Functions Card Editing Card, Format YES