Panasonic NV-EX21EG Index Search Functions, Photoshot Index Search, Scene Index Search

W.B./SHUTTER/IRIS/	1
2 MF/VOL/JOG 1

PUSH

1

START/

DATE/ PHOTO STOP

OSD TIME SHOT

COUNTER RESET	TITLE ZOOM
MULTI/		T
	A.DUB
P-IN-P ¥REC		r
		sVOL

V/REW PLAY FF/W

36 1 5 W

	STILL ADV	PAUSE	STILL ADV
	E	;	D
4	INDEX	STOP	INDEX	1
2	K	∫	L
	SELECT	VAR.	P.B.
		SEARCH	ZOOM
	STORE		MENU
	OFF/ON		SET	2
	P.B.DIGITAL		ITEM

A

INDEX

B

S 1

Index Search Functions

To facilitate searching of desired scene, this Movie Camera automatically records index signals during recording, as explained in the following.

Photoshot Index Signal

These signals are automatically recorded whenever still pictures are taken in Photoshot Mode (l19) on the tape. Photoshot Index Signals are not recorded on still pictures recorded in Continuous Photoshot Mode.

Scene Index Signal

Scene Index Signals are automatically recorded when you start recording after inserting a Cassette.

≥If [SCENEINDEX] of [RECORDING SETUP] Sub-Menu on the [CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index signal is recorded when recording is restarted after an elapse of 2 hours or longer. If it is set to [DAY], an index signal is recorded when recording is restarted

after the date has changed since the last recording. (While the index signal is recorded, the [INDEX] Indication flashes for a few seconds. A)

≥If the Movie Camera is switched from the VCR Mode to Camera Mode or if the date and time is set before the start of recording, the index signal is not recorded.

ªPhotoshot Index Search

1Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [SEARCH] >> [PHOTO].

2Press the [9] Button 1 or [:] Button 2 on the Remote

Controller.

≥At every press of the corresponding button, the tape is fast-forwarded or rewound to the next still picture recorded in the Photoshot Mode. After reaching the next still picture, the still picture is played back continually, however the sound only for approximately 4 seconds.

ªScene Index Search

1Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [SEARCH] >> [SCENE].

2Press the [9] Button or [:] Button on the Remote

Controller.

≥When the corresponding button is pressed once, the [S 1] Indication B appears, and searching of the subsequent scene marked with an index signal starts. Each time the button is pressed after the start of Scene Index Search, the indication changes from [S 2] to [S 9], and the beginning of the scene corresponding to the selected number will be searched.

≥Up to 9 scene numbers can be selected.

Continuous Index Search

If the [9] Button or the [:] Button is pressed for 2 seconds or longer, search can be continued at several-second intervals. (To cancel, press the [1] Button 3 or the [∫] Button 4.)

≥For other notes concerning this item, see page 48.

28