Panasonic PT-L712NTE manual Ssid

	AD HOC		INFRASTRUCTURE
&	In Ad Hoc mode, make the “IP	SSID
	ADDRESS” setting in step
	( below.	If using Infrastructure mode,
		change the “SSID” setting to the
		same SSID for the access point
		that will be used for
		communication. However, the
		projector’s SSID can be up to 16
		characters in length, and must
		consist of capital letters (A-Z)
		and numerals (0-9).
		Accordingly, if the SSID that has
		been set for the access point is
		invalid as an SSID for the
		projector, ask your network
		administrator to change the
		access point’s SSID to one that
		can be used by the projector.
		Use the F or G button to
		change the characters, and use
		the I or H button to change
		the character position. When
		you have finished, press the
		ENTER button.
			S E T U P
			S S I D
			S S I D
( IP ADDRESS
	This lets you set the projector’s IP address.
	Refer to page 14 of “Wireless function preparation” while making
	this setting. However, the projector’s IP address cannot be the
	same as the IP address that is being used by the transmitting
	computer.
	Use the F or G button to change the number position, and use the
	I or H button to set the numbers. When you have finished, press
	the ENTER button.

S E T U P

I P A D D R E S S

1 9 2 . 1 6 8 . 1 0 . 1 0

-24-