(3) When using an existing access point for wireless communication
Use the access point to carry out wireless communication between the computer and the projector in Infrastructure mode. Some access points may not let you make connections.
Computer Computer Computer
LAN |
ComputerAccess pointProjector
Setting procedure
Set the computer and the projector according to the following procedure.
Preparation & |
|
| Checkcommunication |
|
| Transmit |
settings |
|
|
|
|
| images |
<Projector> |
|
| <Computer> |
|
| <Computer> |
Inserting the |
|
| Use Wireless |
|
| Use Wireless |
wireless card (page |
|
| Manager to check |
|
| Manager to |
|
|
|
| |||
18) |
|
| communication with |
|
| transmit the |
LAN settings (page |
|
| the projector (page |
|
| images (page |
21) |
|
| 40) |
|
| 41) |
|
|
|
|
|
|
|
Setting example
Setting item | Projector LAN settings |
IP ADDRESS | Ask your network administrator for details on |
SUBNET MASK | settings. |
MODE | INFRASTRUCURE |
CHANNEL | Set to the same CHANNEL as the CHANNEL for the |
| access point. (Ask your network administrator for |
| details.) |
SSID | Set to the same SSID as the SSID for the access |
| point. (Ask your network administrator for details.) |
Note:
•If either the projector or computer is out of the range of the access point, use Ad Hoc mode as described in page 14.
