Make the following settings # Select Setting | Panasonic PT-L712NTE

Make the following settings.

# Select Setting

If creating several network settings, use the G button to select a setting.

$ Setting Name

Lets you type a name for the network setting.

(Example) LAN1

%Create

Creates a new network setting.

&Delete

Deletes the currently-displayed network setting.

( Copy

Creates a new network setting and copies the contents of the currently-displayed network setting to the new setting.

) NIC (Network Interface Card) Selects the wireless card to be used.

*LAN card’s number

Type in the last digit of the product number for the wireless card that you are using (see page 5).

TCP/IP

+Use DHCP

Select if you would like to assign an IP address so that the computer

can use a DHCP server.

-IP address

Type in the computer’s IP address. The computer’s IP address cannot be the same as the projector’s IP address or another computer’s IP address.

Refer to page 14 of “Wireless function preparation” while making this setting.

. Subnet Mask

Type in the subnet mask.

Refer to page 14 of “Wireless function preparation” while making this setting.

/Gateway

Type in the gateway address.

This setting is not required for communication with the projector.

This setting is not compatible with the metric settings for Windows 2000. If metric settings are required, make the setting using the “Advanced TCP/IP settings” window in Windows 2000.

-38-

Image 38

Panasonic PT-L712NTE manual Make the following settings # Select Setting, $ Setting Name, Create, Delete, Copy, + Use Dhcp

Contents

Operating Instructions LCD Projector Commercial Use Contents Do not insert any foreign objects into the card slot Safety PrecautionsDear Panasonic Customer Radio frequencies used by the wireless card Do not use the cards near other sources of radio emissions Available channels Etsi Wireless card Check accessoriesWireless card slot Names of each part Wireless image transfer system for the projector System diagram Transferable images Main functions of the application software Software Functions Subnet Mask Explanation of termsIP Address Gateway Access Point Ad Hoc ModeInfrastructure Mode Channel Jpeg PowerPoint Exif Setting procedure Wireless function preparationFirstly, when using the wireless function Setting example ComputerProjectorComputer LAN Page # Turn off the power supply for the projector Installing and removing the wireless cardInserting the wireless card Close the slot cover Push in the eject switch and then remove the wireless card Removing the wireless card$ Open the slot cover Press the eject switch On-screen menus List of menu screens Projector LAN settings LAN Setup Lock Setup $ Mode Channel Ssid Subnet Mask KEY Installing the wireless card Setting up the computer wireless cardInstalling and removing the computer’s wireless card For Windows Installing the driverRemoving the wireless card Click OK without changing any of the detailed settings Click Finish Click Yes. The computer will then re-start Checking the protocol Click YesPage Click OK + Click Yes. The computer will then Re-start Page Installing the Configuration Utility Click Close Starting and closing the Wireless Manager Using the Wireless ManagerWireless Manager capabilities Displaying the Configuration Utility Computer network settings Create Make the following settings # Select Setting$ Setting Name Delete Wireless LAN Mode Checking communication with the projector Basic image transmission examples Example 2 Projecting already-existing images Functions of the Capture window Before transmitting imagesCapturing and transmitting computer screen images Selecting the capturing method Close button $ Right-click the icon on the taskbar, and select Capture Full Screen captureArea capture Active Window capture Click Capture Start Select the window to be captured. Note Setting the capturing conditions Transmitting existing images Functions in the Image List window Basic operations # Number of Loops Using Auto Play to play images in a specified orderImage List status settings $ Interval Other useful Wireless Manager functions Shortcut Key Assignment Encryption settings Using Jpeg Convertor What Jpeg Convertor can do Starting Jpeg Convertor Main screen functions Minimize button + Picture quality sliderSave to SD Memory Card button Maximize button Quality Importing files using drag-and-drop Images which cannot be imported Sorting images Checking, sorting and deleting imagesChecking images Double click on the image you wish to check Conversion settings for saving images Deleting images Converted size list box Saving to other foldersSave as different size check box Picture quality slider File names DCF standardLimits on directory names File format Symptom Check the following Using the Serial connectorBefore asking for service Message List Symptom Check the following Symptom Check the following Specifications PAL-N / Secam Sync Wireless card Options Dimensions Trademark Information Made in Japan S0801-2081C