Panasonic PT-L712NTE Wireless function preparation, Firstly, when using the wireless function

Wireless function preparation

The methods of transferring images using a wireless LAN can be broadly classified into three types according to the environment you are currently using.

(1) Firstly, when using the wireless function

Insert an optional ET-CDWL1 series wireless card into a computer, and use Ad Hoc mode so that the computer can carry out direct wireless communication with the projector.

ComputerProjector

Setting procedure

Set the computer and the projector according to the following procedure.

Preparation & settings

<Projector>	<Computer>
Inserting the	Inserting the
wireless	wireless card
card (page	(page 27)
18)
	Network
LAN	settings using
settings	Wireless
(page 21)	Manager
	(page 37)

Setting example

Check

communication

<Computer>

Use Wireless Manager to check communicatio n with the projector (page 40)

Transmit

images

<Computer>

Use Wireless Manager to transmit the images (page 41)

Setting item	Projector LAN	Network	settings using
	settings	Wireless	Manager at
		computer
IP ADDRESS	192.168.10.10 (default)	Set the address to
	If using two or more	something like
	projectors, use different	192.168.10.11 or
	addresses for each.	192.168.10.12. Do not
		use the same address as
		used for the projector.
SUBNET MASK	255.255.255.0 (default)	255.255.255.0
MODE	AD HOC	Ad Hoc
CHANNEL	11 (default)	11
	Use the same setting	Use the same setting for
	for the computer.	the projector.
	-14-