-25-
AD HOC INFRASTRUCTURE
)))) SUBNET MASK
This lets you set the projector’s subnet mask.
Refer to page 14 of “Wireless function preparation” while making
this setting.
Use the For G button to set the numbers, and use the I or H
button to change the number position. When you have finished,
press the ENTER button.
SETUP
SUBNET MASK
255.255.255. 0
**** HOSTNAME
This lets you set a network name for the projector. The projector’s
host name can be up to 16 characters in length, and can contain
capital letters (A-Z), numerals (0-9) and “-” (hyphen).
Use the F or G button to change the characters, and use the I or
H button to change the character position. When you have
finished, press the ENTER button.
SETUP
HOSTNAME
PANASONIC PRJ-01
++++ ENCRYPT
You can use this function to encrypt the image data. However,
when encryption is enabled, it takes longer for images to be
transferred.
To enable encryption, set to “ON”. If set to “OFF”, encryption is not
carried out.
The Wireless Manager encryption settings on page 51 must be
carried out.
Use the I or H button to change the setting. When you have
finished, press the ENTER button.
SETUP
ENCRYPT
ON
OFF