ComputerProjectorComputer | Panasonic PT-L712NTE manual

(2) If already using computers for wireless transmission (Ad Hoc mode)

Use the existing wireless cards for the computers to carry out direct wireless communication with the projector in Ad Hoc mode.

ComputerProjectorComputer

Setting procedure

Set the computer and the projector according to the following procedure.

Preparation &				Checkcommunication				Transmit
settings								images
<Projector>				<Computer>				<Computer>
Inserting the				Use Wireless				Use Wireless
wireless card (page				Manager to check				Manager to
wireless card (page				Manager to check				Manager to
18)				communication with				transmit the
LAN settings (page				the projector (page				images (page
21)		40)				41)

Setting example

Setting item	Projector LAN settings
IP ADDRESS	Set the computer IP address to an address with the
	last number different.
	e.g. If the computer IP address is 192.168.10.11, set
	the projector’s address to something like
	192.168.10.12.
SUBNET MASK	Use the same setting for the computer.
MODE	AD HOC
CHANNEL	Use the same setting for the computer.

Note:

•The computer settings can be used without further changes. However, if using the WEP function, communication with the projector will not be possible. You will first need to turn off the WEP function for all computers which are to communicate with the projector.

Furthermore, when the WEP function is turned off, the data encryption function will also be turned off, so it is recommended that you use a feature such as the Sharing Settings for folders to set password protection for your data. Ask your network administrator for further details.

•If you any wireless cards other than the optional ET-CDWL1 series, correct operation cannot be guaranteed.

-15-

Image 15

Panasonic PT-L712NTE manual ComputerProjectorComputer

Contents

LCD Projector Commercial Use Operating Instructions Contents Safety Precautions Dear Panasonic CustomerDo not insert any foreign objects into the card slot Do not use the cards near other sources of radio emissions Radio frequencies used by the wireless card Etsi Available channels Names of each part Check accessoriesWireless card slot Wireless card System diagram Wireless image transfer system for the projector Transferable images Software Functions Main functions of the application software Gateway Explanation of termsIP Address Subnet Mask Channel Ad Hoc ModeInfrastructure Mode Access Point Jpeg Exif PowerPoint Setting example Wireless function preparationFirstly, when using the wireless function Setting procedure ComputerProjectorComputer LAN Page Close the slot cover Installing and removing the wireless cardInserting the wireless card # Turn off the power supply for the projector Removing the wireless card $ Open the slot cover Press the eject switchPush in the eject switch and then remove the wireless card List of menu screens On-screen menus LAN Setup Projector LAN settings Lock Setup Channel $ Mode Ssid Subnet Mask KEY Setting up the computer wireless card Installing and removing the computer’s wireless cardInstalling the wireless card Installing the driver Removing the wireless cardFor Windows Click Finish Click OK without changing any of the detailed settings Click Yes. The computer will then re-start Click Yes Checking the protocolPage Click OK + Click Yes. The computer will then Re-start Page Click Close Installing the Configuration Utility Displaying the Configuration Utility Using the Wireless ManagerWireless Manager capabilities Starting and closing the Wireless Manager Computer network settings Delete Make the following settings # Select Setting$ Setting Name Create Mode Wireless LAN Checking communication with the projector Example 2 Projecting already-existing images Basic image transmission examples Before transmitting images Capturing and transmitting computer screen imagesFunctions of the Capture window Close button Selecting the capturing method Full Screen capture Area capture$ Right-click the icon on the taskbar, and select Capture Click Capture Start Select the window to be captured. Note Active Window capture Setting the capturing conditions Functions in the Image List window Transmitting existing images Basic operations $ Interval Using Auto Play to play images in a specified orderImage List status settings # Number of Loops Shortcut Key Assignment Other useful Wireless Manager functions Encryption settings What Jpeg Convertor can do Using Jpeg Convertor Main screen functions Starting Jpeg Convertor Maximize button + Picture quality sliderSave to SD Memory Card button Minimize button Quality Images which cannot be imported Importing files using drag-and-drop Double click on the image you wish to check Checking, sorting and deleting imagesChecking images Sorting images Deleting images Conversion settings for saving images Picture quality slider Saving to other foldersSave as different size check box Converted size list box File format DCF standardLimits on directory names File names Message List Using the Serial connectorBefore asking for service Symptom Check the following Symptom Check the following Symptom Check the following PAL-N / Secam Specifications Sync Options Wireless card Trademark Information Dimensions Made in Japan S0801-2081C