A. OLCmd Reference

OLCmd uhread

The uhread command starts and stops the User History Reader (UHReader) from a command line. It can be used to process user history records automatically during periods of low network activity.

Format:

OLCmd uhread -ccommand [-npoller-name ]

Where:

 

-ccommand

Specifies the action to be taken. command may be

 

one of:

 

singleRead – Reads all collected user history

 

poll files, then halts

 

run – Runs UHReader until the shutdown

 

command is issued

 

shutdown – Shuts down UHReader if it is

 

Trunning

 

status – Shows the status of UHReader

-npoller-name

Optionally specifies the poller domain to read from

 

when the singleRead or run command is issued. If

 

no poller domain is specified, all poller domains

 

are read.

Example:

The following command causes UHReader to read all collected user history poll files, then stop:

OLCmd uhread -c singleRead

7800-A2-GB32-00

January 2002

A-29

Page 99
Image 99
Paradyne SLM 5.5 manual OLCmd uhread -ccommand -npoller-name, Command, Poller-name, OLCmd uhread -c singleRead